BMW OPS diagnostic tools
PRODUCT DESCRIPTION: Vehicle models from the E65 on,it is the first time for BMW to use fibre-optic cables as the standard for communication between control units.prefix = o ns = "urn:schemas-microsoft-com:office:office"
The optical buses are notable for their high data transmission rate and they are not susceptible to electromagnetic interference. The optical buses in question are the MOST bus, primarily used for in-car entertainment electronics, and the byteflight bus, which serves predominantly safety-critical functions.
OPPS has been designed for encoding, individualising and programming ( CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnosis Information system (DIS) from DISPlus and Group Test One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head. OPS is intended for rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring pro-cedures are possible, as no measuring technology is incorporated; in this instance, OPPS / OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD interface. The OBD interface is required for the power supply to the OPPS / OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be ***ermined. From CIP version 7.0, it is possible to delete fault code memories via OPPS / OPS.
INCLUDED IN THE SET : -OPS Orange Multiplexer Head
-16 pin OBD-II cable,
-Most Cable(Fiber Cable),
-LAN cable,
-DIS Software HDD V53
-SSS software HDD V28
Note:IBM T30 laptop : CPU P4 prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" 1.8G or higher,RAM 512MB or higher(Laptop not included) |
Home
